Valve Service & Repair

Let us exceed your expectations

AVP valve is a complete valve repair facility.  We have the capability of repairing any type of valve from safety valves to control valves to gate valves to large butterfly valves.  We have factory trained technicians and work very closely with many valve and actuator manufacturers.

Valve Manufacturer’s Association

Valve Repair Council

ValvKeep Valve Repair Record Keeping Software

  • National Board of Boiler Inspectors “VR” Stamp Safety Valve Repair Center
  • Control Valve Repair Center
  • Gate, Globe, Check, Ball, and Butterfly valve repair
  • Electric Actuator Repair
  • Pneumatic Actuator Repair
  • Baker Hughes Consolidated Safety Valve Green Tag Center
  • Consolidated Authorized Repair Center
  • Crane/Pacific Authorized Repair Center
  • Velan Authorized Repair Center

Come and Visit our Facility

AVP Valve has a large facility centrally located in Lakeland, Florida.  We have approximately 20,000 sqft under roof and a fleet of 25+ field trucks.

Machine Shop

AVP has a large machine shop that can do many types of specialized machining.  Many times, valve parts just have minor damage that requires re-facing of the seating surfaces.  AVP’s machine shop can touch up existing trim instead of replacing the trim which will save you money on your repair.  AVP always prefers to use OEM parts, but if parts are not available, AVP has the capability to make new parts in many cases.

ASME Certified Boiler

Boiler

Sand Blasting Station

Sand Blast

Safety Valve Repair

AVP is an authorized assembler of Consolidated Safety valves and is authorized by the American Society of Mechanical Engineers (ASME) and the National Board of Boiler & Pressure Vessel Inspectors (NB) to set and test board certified relief devices. AVP holds a “VR” Stamp from the National Board for the repair of all brands of safety and safety relief valves. Brands like Consolidated, Crosby, Anderson Greenwood, Kunkle, Lonergan, Farris, and any other National Board approved manufacturer. AVP has a steam boiler rated to 1750 psig for testing valves on steam and air and liquid testing capability to 10,000 psig. Higher set pressures can be obtained with the aid of the BHGE Consolidated Electronic Valve Tester (EVT).

AVP can repair safety valves in your plant. Large or welded-in safety and safety relief valves can be repaired in place. Once the repair is completed and the system is back on line, our technicians can come in and set the valve with Consolidated’s EVT.

AVP’s technicians are trained through Consolidated’s training process which is an in-depth three-tier process. First, the apprentice technician must work with a certified technician to get familiar with the safety valves. Then, they are sent to BHGE Consolidated in Jacksonville, FL, for a week of training. Next, they must come back to work in our shop to hone the skills that were learned in the first training class. Then they are sent back to BHGE Consolidated for another week’s training. The technician again comes back to work and practice. Finally, the technician is sent to Consolidated for a third week of training. This training from start to finish takes about 18 – 24 months to complete so by the time the technician has completed all of his training, he truly has the experience to tackle most valve problems.

AVP goes through great expensive to make sure that we have the best trained technicians in the area. For your records, you can download an example of one of our technician’s training certificates and a copy of our National Board “VR” stamp.

Control Valve Repair

AVP has the capability to repair any brand of control valve. Though not an authorized repair center for all, AVP regularly repairs Fisher, Masoneilan, Leslie, Valtek, CCI, and Copes Vulcan control valves. On site engineering can aid in troubleshooting chronic valve and process problems. We can suggest reasons for frequent failures and suggest modifications to prevent future failures. We can also suggest replacement valves if the current valve is beyond repair.

AVP has machining and welding capabilities that enable AVP to truly repair your valve, not just change out the parts. Making weld repairs and machining the existing parts can be quicker and less expensive than simply filling a valve with new parts.

No need to remove a control valve for repair if the valve is welded in or if you are down for an emergency shutdown and the clock is running. AVP can repair your control valve in line and get your plant back up and running.

Seat Leakage Testing

AVP can calibrate any positioners. AVP has a leak testing stand that can measure a valve’s leakage before and after a repair. AVP can test a control valve for conformance to Class II, III, IV, V, and VI leakage rates.

Ball Valve Repair

AVP can repair any type of ball valve from small 1″ ball valves up to this 24″ Grove ball valves and even larger. Metal seated and ceramic seated ball valves are no problem for AVP.

Butterfly Valve Repair

AVP can repair any type of butterfly valve from AWWA, to high performance butterflies. AVP even does triple offset heavy duty butterfly valves.
Size is not a factor. AVP regularly gets in valves for repair in the 90″ range.

Gate, Globe, and Check Valve Repair in our Shop

Gate, Globe, and Check Valves have always been thought of as generic, no frills valves. This may be true when they are new but repairing them is anything but generic. Parts for gate, globe, and check valves from most manufacturers are unavailable so your repair house can not simply change out parts. They must make the valve work properly with the valve’s existing parts. This means special grinding, machining, and fitting techniques must be employed that are not found just anywhere. If a valve’s seating area is completely washed out, AVP can strip off the old Stellite and weld on new Stellite.


AVP has the capability to make a repaired gate, globe, or check work better than it did when it was new.

Gate, Globe, and Check Valve Repair in the field

Many times a valve is too big to send to our shop in Lakeland for repair or it is welded in. This is not a problem for AVP. We can repair the valve without moving it. Size is not an issue. AVP can repair any size gate, globe, or check valve.

Valve Modifications

AVP can perform a variety of special modifications to get you just the valve that you need. We can automate manual valves with electric or pneumatic actuators. We can install bypasses around large valves for warm-ups or pressure-balance modifications. We can combine valves into a small valve system before shipping to the customer so that less welds are required in the field.

Whatever you need, AVP can deliver!

Actuator Repair

  • Pneumatic Piston Actuators
  • Pneumatic Diaphragm Actuators
  • Electric Actuators
  • WE FIX THEM ALL!

AVP has technicians trained by Limitorque to fix any brand of electric actuator. We can repair control valve diaphragm actuators, linear piston actuators, and quarter-turn piston actuators.